Training Cisco CCNA

Training Cisco Certified Network Associate (CCNA) adalah sertifikasi level associate bagi network engineer yang ingin mendalami dunia network Cisco. Training CCNA FastTrack merupakan program training yang di rancang bagi IT Engineer yang ingin mengambil ujian sertifikasi CCNA RS. Dalam proses training selama 4 hari yang disampaikan oleh trainer yang berpengalaman di industri networking, peserta diharapkan memahami materi dan lab dengan baik, sehingga peserta dapat lulus ujian CCNA RS dan dapat menerapkan ilmunya di industri kerja

training cisco ccna

Network Fundamentals

  1. Compare and contrast OSI and TCP/IP models
  2. Infrastructure components in an enterprise network
  • Firewalls
  • Access points
  • Wireless controllers
  • Router
  • Switch
  1. Select the appropriate cabling type based on implementation requirements
  2. Configure, verify, and troubleshoot IPv4 addressing and subnetting
  3. Compare and contrast IPv4 address types
  4. Describe the need for private IPv4 addressing
  5. Configure, verify, and troubleshoot IPv6 addressing
  6. Configure and verify IPv6 Stateless Address Auto Configuration
  7. Compare and contrast IPv6 address types
  • Global unicast
  • Unique local
  • Link local
  • Multicast
  • Modified EUI 64
  • Autoconfiguration
  • Anycast

LAN Switching Technologies

  1. Describe and Verify Switching Concepts
  2. Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple
  • Access ports (data and voice)
  • Default VLAN
  1. Configure, verify, and troubleshoot interswitch connectivity
  • Trunk ports
  • Add and remove VLANs on a trunk
  • DTP, VTP (v1&v2), and 802.1Q
  • Native VLAN
  1. Configure, verify, and troubleshoot STP protocols
  • STP mode (PVST+ and RPVST+)
  • STP root bridge selection
  1. Configure, verify and troubleshoot STP related optional features
  • PortFast
  1. Configure and verify Layer 2 protocols
  • Cisco Discovery Protocol
  • LLDP
  1. Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
  • Static
  • PAGP
  • LACP
  1. Switch Stacking and Chassis Aggregation

Routing Technologies

  1. Describe the routing concepts
  2. Interpret the components of a routing table
  • Prefix
  • Network mask
  • Next hop
  • Routing protocol code
  • Administrative distance
  • Metric
  • Gateway of last resort
  1. Describe how a routing table is populated by different routing information sources
  • Admin distance
  1. Configure, verify, and troubleshoot inter-VLAN routing
  • Router on a stick
  • SVI
  1. Compare and contrast static routing and dynamic routing
  2. Compare and contrast distance vector and link state routing protocols
  3. Compare and contrast interior and exterior routing protocols
  4. Configure, verify, and troubleshoot IPv4 and IPv6 static routing
  • Default route
  • Network route
  • Host route
  • Floating static
  1. Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4
  2. Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6
  3. Configure, verify, and troubleshoot EIGRP for IPv4
  4. Configure, verify, and troubleshoot EIGRP for IPv6

WAN Technologies

  1. Configure, verify, and troubleshoot GRE tunnel connectivity
  2. WAN topology options
  3. Configure and verify single-homed branch connectivity using eBGP IPv4

Infrastructure Services

  1. Configure and verify DHCP on a router (excluding static reservations)
  • Server
  • Relay
  • Client
  1. Configure, verify, and troubleshoot basic HSRP
  • Priority
  • Preemption
  • Version
  1. Configure, verify, and troubleshoot inside source NAT
  • Static
  • Pool
  • PAT
  1. Configure and verify NTP operating in a client/server mode
  2. Configure, verify, and troubleshoot port security
  • Static
  • Dynamic
  • Sticky
  • Max MAC addresses
  • Violation actions
  • Err-disable recovery
  1. Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
  • Standard
  • Extended
  • Named
  1. Configure, verify, and troubleshoot basic device hardening
  • Local authentication
  • Secure password
  • Access to device
  1. Device security using AAA with TACACS+ and RADIUS

Infrastructure Management

  1. Configure and verify device-monitoring protocols
  • SNMP
  • Syslog
  1. Configure and verify device management
  • Backup and restore device configuration
  • Using Cisco Discovery Protocol or LLDP for device discovery
  • Logging
  • Timezone
  • Loopback
  1. Perform device maintenance
  • Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
  • Password recovery and configuration register
  • File system management
  1. Use Cisco IOS tools to troubleshoot and resolve problems
  • Ping and traceroute with extended option
  • Terminal monitor
  • Log events
  • Local SPAN
  1. Network programmability in enterprise network architecture
  • Function of a controller
  • Separation of control plane and data plane
  • Northbound and southbound APIs